Metacaulk® Firestop by RectorSeal
Showing 16–27 of 27 results
-
Devices and Large Openings
Metacaulk Intumescent Sleeves
DESCRIPTION: Flexible design of durable galvanized steel outer shell lined with precured dry intumescent that easily conforms to contours of pipes for through-penetrations and angled penetrations, ideal for retrofit and flammable pipes penetrating an uneven concrete fluted deck assembly.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy installation without modifications, steel bolts or fasteners; fasten with fiberglass tape, pop rivets or hose clamps around pipe
- Economical and saves on labor cost; no measurement of material required
- No need to firestop both wall penetration sides; can be installed from top or underside for floor applications; eliminates need for collars/wrap strips
- Can be retrofitted, easily removed and replaced material
- Ideal for large PVC or engineer plastic pipes going through concrete fluted decks
- Ideal for applications when pipes are installed on at an angle
- Ideal for installing around a coupling located in floor and wall openings
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115; tested for PVC, CPVC, ABS and PVC/ABS Foam Core, FRPP, PP; VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Joint Strip
DESCRIPTION: Flexible, precured dry intumescent strips used for concrete & masonry floor & wall joints up to 2″ (51 mm) wide, duct insulation and up to 4″ PVC/CPVC & membrane penetrations.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; single-sided application
- Highly versatile, flexible; economical
- May be covered with any color standard architectural caulk; no firestop caulk required
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) & ASTM E1966 (UL 2079); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops
SKU: n/a -
Devices and Large Openings
Metacaulk Mortar
DESCRIPTION: Rapid-hardening compound of gypsum and cement for large opening through-penetrations in floors and walls (ideal for cable trays, power cables, fiber optic telephone cables, etc. [not aluminum]).
FEATURES:
- Best combination of workability, strength & fire resistance; safe and simple to use; high yield per pound
- Workable in approximately 45 minutes with non-sag adjustable consistency (pourable or trowelable); no special tools needed to mix or install
- Ideal for large openings containing multiple penetrants
- Sets without shrinking; forms rigid, gas tight, fire-resistant seal that can easily be cut/drilled/resealed if future penetrants are needed
- Protected in wet & dry stages against mold growth with a combination of biocides
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with ASTM E814 (UL 1479)
SKU: n/a -
Devices and Large Openings
Metacaulk Pass Thru Pro (PATP)
DESCRIPTION: Firestop device that protects through-penetrations for up to 4 hours while providing flexibility to add, re-add or remove penetrants at any time.
FEATURES:
- Reduces labor time with quick installation and flexibility to modify penetrants as often as needed
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Will not mechanically pinch cables
- Available in 2” (50mm) Round, 4” (102mm) Round, and 4” (102mm) Square (as Single, Double, Tri-Plex, Six-Plex)
- Up to 4-hour fire rating
- Excellent “L” rating
- Zero maintenance
PERFORMANCE: UL Classified system up to 4 hrs; tested in accordance with UL 1479
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Putty Pads
DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in pad form for through-penetration systems.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- Easy to install; applied by hand; no curing time; adheres to all common building surfaces
- Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
- Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479) and ASTM E119 (UL 263); STC Rating 60; only 1/8″ thickness needed for 1-2 hr fire rating; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Putty Sticks
DESCRIPTION: Moldable, non-curing, single-component, intumescent pliant in stick form for through-penetration systems.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- For interior use with various penetrations (cabling, EMT pipe, conduit, etc.); no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- Easy to install; applied by hand; no curing time; adheres to all common building surfaces
- Helps provide a barrier or buffer for energized bus ducts or conduits as well as provide a barrier from vibration and movement; no additional putty material needed to plug end of each electrical metallic tube or conduit as its connection to the box
- Required by Building Codes in rated partitions where horizontal separation of opposite facing electrical boxes is under 24 inches
PERFORMANCE: UL Classified system up to 3 hrs; tested in accordance with ASTM E814 (UL 1479), ASTM E119 (UL 263); VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; STC Rating 60
SKU: n/a -
Sealants and Sprays
Metacaulk RS 136 Fire Block / Smoke Seal Caulk
DESCRIPTION: Incombustible fire-block, smoke-seal, acoustic-block and draft-stop caulk that beds and seals small voids, splices and gaps. Not for use in continuous vibration or wet environments.
FEATURES:
- Inorganic material with no volatile solvents (particularly useful when installing in confined spaces or occupied areas); does not have asbestos fillers
- An easy installation sealant with water cleanup capabilities; no mixing or special skills necessary & no required additives; applied with a conventional caulking gun
- Excellent freeze-thaw
- 2-year shelf life
PERFORMANCE: UL Classified system; tested in accordance with ASTM E136
SKU: n/a -
Metacaulk Acoustic Products, Sealants and Sprays
Metacaulk Smoke and Acoustic 90 (SAS 90)
DESCRIPTION: High-quality sealing compound comprised of acrylic latex essential for non-fire-rated penetrations and joints in achieving and maintaining the required Sound Transmission Class (STC) rating for airborne sound and preventing the passage of smoke and toxic gases in smoke barrier partitions, as required by the IBC.
FEATURES:
- Excellent freeze-thaw
- High adhesion, tough long-lasting bond
- 2-year shelf life
- Flexible, non-sag set, water cleanup capabilities; paintable
- Mold and mildew resistant
PERFORMANCE: Tested in accordance with ASTM E90, ASTM E84, ASTM C834, ASTM C919, ASTM G21; Low VOC content; meets LEED V4 Emissions requirements; STC rating 62
SKU: n/a -
Wraps, Strips and Putties
Metacaulk Wrap Strip
DESCRIPTION: Flexible, precured dry intumescent strips used mainly for plastic & insulated pipe applications, wrapped simply around penetrating item(s) to completely fill annular space. In addition, for use with a universal collar for engineered plastic pipes 8 in. diameter and greater.
FEATURES:
- Intumescent expands at the exposure of heat, forming a refractory char that tightly seals preventing the spread of flame, smoke and toxic fumes
- Easy to install; no cure time
- Excellent freeze-thaw
- Highly versatile, flexible; economical
- Long length means less waste
- Systems up to 14″ PVC
PERFORMANCE: Tested in accordance with ASTM E814 (UL 1479); VOC compliant (CDPH Standard Method v1.2); complies to Required Environmental Exposure Testing of Accelerated Aging and High Humidity as per UL 1479 Fire Test of Through-Penetration Firestops; tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero
SKU: n/a -
Firestop Accessories
Safing Mineral Wool
DESCRIPTION: MinWool1200 Industrial Board Insulation is made of basalt volcanic rock fibers with thermosetting resin binder. Advanced production ensures reliable quality, high fiber density & low shot content for high temperature heat control & fire resisting use.
FEATURES:
- Thermal insulation gives control over heat loss for lower operating costs
- Easy to handle, fabricate & cut with a knife; clean handling reduces irritation and minimizes clean-up & expense
- Does not support fungi/mold
PERFORMANCE: Tested in accordance with ASTM E84 (UL 723), CAN/ULC-S102-M (flame spread rating of 5 and smoke developed rating of 0; faced insulation has flame spread rating of 25 and smoke developed rating of 5); noncombustible in accordance with ASTM E136 and CAN4-S114-M
SKU: n/a -
Acoustical Joints & Partition Closures, Sealants and Sprays
Smoke and Acoustic Sealant (SAS)
DESCRIPTION: High-grade acrylic latex sealant that permanently seals non-rated through-penetrations, membrane openings, and static & dynamic joints in smoke & sound-rated assemblies, impeding the transfer of sound.
FEATURES:
- Interior use; excellent for large openings; may be used in vertical and horizontal assemblies in linear joints in walls or floors
- 3-year shelf life
- Flexible set, water cleanup capabilities; paintable; easy to dispense
- Protected in wet & dry stages against mold growth with a combination of biocides
PERFORMANCE: Tested in accordance with ASTM E834 and ASTM E90; VOC compliant (CDPH Standard Method v1.2); tested by a third party independent laboratory to the ASTM G21 standard with Fungal Growth Rating results of zero; meets LEED criteria under Environmental Air Quality and Regional Materials; STC rating 69; Compliant with the Buy America Act
SKU: n/a
